Somerset County Pennsylvania Roofing Expert Witness Directory

A Green Light for Housing? What Executive Order 14394 Means for Your Next Project

May 26, 2026 — Bennett Houck, Miranda Martinez & Byron Sarhangian - Snell & Wilmer
On March 13, 2026, President Trump signed Executive Order 14394, “Removing Regulatory Barriers to Affordable Home Construction” (the “Order”). The Order directs federal agencies to reduce regulatory burdens on residential development, streamline environmental permitting, and encourage state and local governments to adopt housing-friendly policies. The Order includes several key provisions that developers and homebuilders should be aware of moving forward. Key Provisions The Order targets four main areas: 1. Federal Environmental Regulations First, it directs the Secretary of the Army and Environmental Protection Agency (EPA) to revise permitting standards, including stormwater permits, wetlands permits under Section 404 of the Clean Water Act, and related construction-site requirements. The Order also targets energy-efficiency mandates for U.S. Department of Housing and Urban Development (HUD) and U.S. Department of Agriculture (USDA) financed housing. For developers and homebuilders, these revisions could reduce project delays and compliance costs associated with stormwater management, wetlands mitigation, and energy-efficiency upgrades, expenses that often add significant time and cost to residential development projects. Reprinted courtesy of Bennett Houck, Snell & Wilmer, Miranda Martinez, Snell & Wilmer and Byron Sarhangian, Snell & Wilmer Mr. Houck may be contacted at bhouck@swlaw.com Ms. Martinez may be contacted at mimartinez@swlaw.com Mr. Sarhangian may be contacted at bsarhangian@swlaw.com Read the full story...

Limitations of Liability Provisions in Construction Contracts: A Means to Manage Risk and Limit Financial Exposure

June 23, 2026 — Ellen Chapelle, Richard Reizen, Hannah Batsche - Construction Executive
Taking a cue from architects and engineers, construction contractors have started inserting limitation of liability clauses in their construction contracts to manage risk and limit financial exposure. This article will address the specific risks that can be limited through an LOL, tips for negotiating the LOL terms with reluctant owners to cover those specific risks, how to limit unintended consequences of an LOL (such as relieving an insurer of its obligations to cover certain losses), and approaches to setting the amount of the liability cap in the LOL. Addressing Particular Risks An LOL can address a wide range of risks, including:

Damages for delay
Liability for non-conforming or defective work
Liability for third-party bodily injury or property damage
Liability excluded by a general liability policy (e.g., pollution and cyber liability)
Liability related to intellectual property

Builders Support Most of Bipartisan Housing Reform Bill in Congress

March 31, 2026 — Esther D'Amico - Engineering News-Record
Several homebuilding groups say they support most of the massive housing reform bill making its way through Congress but want to see certain provisions including those related to build-to-rent and manufactured homes changed before it advances any further. Read the full story...
Reprinted courtesy of Esther D'Amico, Engineering News-Record
ENR may be contacted at enr@enr.com

Engineering Seals Versus Contracts ‘Under Seal’ (Two Very Different Things)

May 05, 2026 — Melissa Dewey Brumback - Construction Law in North Carolina
Recently, I was asked by a reader to explain the difference between a document that is ‘sealed’ by an engineer (or architect) and one that is signed ‘under seal’. This question prompted this post, as others may also be wondering about the distinction. [Hi Ed! Thanks for your question] Professionals have ‘seals’ that show that they are registered (Engineers) or licensed (Architects). As most of you likely know, your professional seal is something that is hard won and which is used when—and only when—your plans were made by you or someone under your direct supervisory control. Your signature represents that you were in responsible control over the documents, and that they have met the required professional standard of care. (21 NC Admin Code 2-0206 (a)(11)). Read the full story...
Reprinted courtesy of Melissa Dewey Brumback, Ragsdale Liggett PLLC
Ms. Brumback may be contacted at mbrumback@rl-law.com

Can Anything Supersede Excel in AEC?

April 27, 2026 — Aarni Heiskanen - AEC Business
If there’s one piece of software that dominates the business world across industries, it’s Microsoft Excel. Can AI finally dethrone the mighty spreadsheet? Memorable Spreadsheet Moments Everyone has memorable spreadsheet moments. I have a few. For example, my then-architecture firm was involved in more than a dozen housing developments abroad. I developed an Excel workbook that took the required number of households as input and automatically generated a breakdown of buildings and their apartment types for AutoCAD. This was urban planning and architectural design done with a spreadsheet. I also developed business software using Excel for project portfolio management. The prototype was later scaled into a commercial SaaS that is now used globally. Another memorable moment was when a property owner told me their Excel file grew so large that it ran out of rows and columns. That must have been before 2007, when the maximum number of columns on a sheet was still just 256 and the maximum number of rows was 65,536. The current limits are 1,048,576 rows and 16,384 columns, which I hope no one will exceed. Read the full story...
Reprinted courtesy of Aarni Heiskanen, AEC Business
Mr. Heiskanen may be contacted at aec-business@aepartners.fi

The Who/What/How of Sealing Plans for Architects and Engineers (Law Note)

March 03, 2026 — Melissa Dewey Brumback - Construction Law in North Carolina
The proper use of professional seals in North Carolina is critical. Failure to follow the prescribed requirements can subject you or your Firm to a Board sanction. Did you know that the NC Board of Architecture and the NC Engineering Board have jointly prepared a fairly straightforward document that can tell you exactly what you need to know about sealing of plans? That document, the “Seal Brochure” (pdf) is available for download. Every state’s regulations are a little different (thank you Federalism!) so it is worth reviewing with your staff at regular intervals, especially if you do work across state lines. Read the full story...
Reprinted courtesy of Melissa Dewey Brumback, Ragsdale Liggett PLLC
Ms. Brumback may be contacted at mbrumback@rl-law.com

Suit Limitation Provision Eliminates Wind Loss Claim

July 27, 2026 — Tred R. Eyerly - Insurance Law Hawaii
The insurer’s motion for judgment on the pleadings was granted after the insured failed to file suit against the insurer within the policy’s two-year suit limitation provision. Interstate Investments, LLC v. Mt. Hawley Ins Co., 2026 U.S. Dist. LEXIS 98108 (S.D. N. Y. May 4, 2026). On or before June 27, 2023, a wind, hail and rainstorm damaged Interstate’s property in Oklahoma. Interstate filed a claim under its policy with Mt. Hawley. The policy provided that New York law applied and contained a two- year suit limitation provision. Read the full story...
Reprinted courtesy of Tred R. Eyerly, Damon Key Leong Kupchak Hastert
Mr. Eyerly may be contacted at te@hawaiilawyer.com

Protect Your Projects By Identifying and Controlling Hidden Contract Risks

March 10, 2026 — Larry Borda & Daniel Lund III - JD Supra
In a recent webinar entitled “Spreading the Risk and Avoiding Killer Contract Clauses,” Phelps lawyers Daniel Lund and Larry Borda examined contractual provisions that most often expose construction professionals to unexpected financial and legal risk. While construction contracts may appear routine, each contract serves as the primary mechanism for managing, allocating, and mitigating risk among parties involved in complex projects—often valued in the hundreds of millions or billions of dollars. When parties fail to fully understand the terms they sign, costly and avoidable consequences frequently follow. Contracts as Risk-Transfer Instruments Construction contracts are the primary method for transferring risk. While contracts authorize work and define scope, they also allocate responsibility for the risks inherent in construction projects. Some may imagine a world where a one-page agreement and a set of plans would suffice. In reality, modern construction requires detailed agreements—particularly provisions designed to anticipate problems, distribute burdens and reduce disputes. Reprinted courtesy of Larry Borda, Phelps and Daniel Lund III, Phelps Mr. Borda may be contacted at larry.borda@phelps.com Mr. Lund may be contacted at daniel.lund@phelps.com Read the full story...

SOMERSET COUNTY PENNSYLVANIA ROOFING EXPERT WITNESS DIRECTORY AND CAPABILITIES